The Pro 2110 6S is an 11.99-tonne GVW goods truck with a 3.0 L E474 diesel engine, 6-speed ET 40S6 gearbox and multiple cargo-body lengths. It is suited to distribution of industrial goods, FMCG, produce and other general cargo.
Eicher E474
3.0 L
105 kW / 140 hp
400 Nm
11,990 kg
6F + 1R
210 L
3,900–5,150 mm
250 mm
8.25R20 radial
23%
BS VI
330 mm
27 L
60,000 km
Technical specifications for the Eicher Pro 2110 6S truck
Body dimensions are length × width. Confirm the exact variant and legal payload before body fitment.
Daily pre-start checks · kilometre-based service schedule · milestone summary · fluids and lubricants · warning actions.
Complete before every shift or trip.
Check the dipstick on level ground before starting.
Act if: Top up or investigate contamination and leaks before driving.
Check the expansion tank when the engine is cold; inspect hoses and radiator.
Act if: Do not open a hot cap; resolve low level or leakage.
Walk around and look beneath the truck for diesel, oil and coolant.
Act if: Repair an active leak before dispatch.
Inspect for cracking, looseness, rubbing and seepage.
Act if: Replace damaged parts before operation.
Confirm sufficient fuel for the route.
Act if: Refuel before the tank runs low.
Check the cluster indication and tank level.
Act if: Top up with approved DEF if low.
Look for water, sediment and filter warnings.
Act if: water or sediment is present, drain or service the filter.
Let the pneumatic system reach its normal operating range.
Act if: Do not move while the low-air warning remains active.
Test response at low speed in a safe area.
Act if: Do not drive if either brake is weak or uneven.
Listen for escaping air around lines, tanks and valves.
Act if: Repair leaks and confirm pressure holds.
Inspect pressure, tread, cuts and sidewalls.
Act if: Correct damage or inflation before loading.
Check for loose fasteners, heat, grease loss or seal leaks.
Act if: Have suspect wheels and hubs inspected.
Inspect springs, mounts, shackles and shock absorbers.
Act if: Repair cracked or loose parts.
Check free play, response and fluid leaks.
Act if: Do not drive with abnormal play or effort.
Test all exterior lamps, horn, washer and wipers.
Act if: Restore visibility and signals before departure.
Confirm start-up self-check and no persistent critical warnings.
Act if: Follow the displayed warning and diagnose before driving.
Check terminals, clamps and visible wiring.
Act if: Secure or repair loose, corroded or damaged connections.
Inspect body mounts, frame and load restraints.
Act if: Secure cargo and repair structural or fastening issues.
Select a milestone. Complete recurring lower-interval tasks whenever due.
Scheduled service
Change engine oil and oil filter; replace both fuel filters and the DEF dosing-pump filter. Run engine diagnostics and inspect cooling level and leaks.
DPF and DEF neck filter
Clean the DPF as required; inspect and replace the DEF secondary neck filter if choked. Investigate related fault indications before continuing operation.
Scheduled service
Complete the 60,000 km core service. Service the cooling system; renew ET40S6 transmission oil (without PTO), differential oil and steering oil/filter; grease front and rear hubs; service the fuel feed-pump filter.
DPF and DEF neck filter
Clean the DPF as required; inspect and replace the DEF secondary neck filter if choked. Investigate related fault indications before continuing operation.
Scheduled service
Repeat the 60,000 km core service, diagnostics and cooling inspection.
DPF and DEF neck filter
Clean the DPF as required; inspect and replace the DEF secondary neck filter if choked. Investigate related fault indications before continuing operation.
Scheduled service
Complete all 120,000 km tasks. Service air-valve kits and replace the APDA/APU desiccant cartridge.
DPF and DEF neck filter
Clean the DPF as required; inspect and replace the DEF secondary neck filter if choked. Investigate related fault indications before continuing operation.
Scheduled service
Complete the 60,000 km core service. Renew clutch hydraulic fluid and service the APDA/APU major kit.
DPF and DEF neck filter
Clean the DPF as required; inspect and replace the DEF secondary neck filter if choked. Investigate related fault indications before continuing operation.
Scheduled service
Repeat the 120,000 km service, including cooling, transmission, differential, steering, hubs and fuel feed-pump filter.
DPF and DEF neck filter
Clean the DPF as required; inspect and replace the DEF secondary neck filter if choked. Investigate related fault indications before continuing operation.
Scheduled service
Repeat the 60,000 km core service, diagnostics and cooling inspection.
DPF and DEF neck filter
Clean the DPF as required; inspect and replace the DEF secondary neck filter if choked. Investigate related fault indications before continuing operation.
A quick view of what is due at each kilometre milestone.
| Mileage / trigger | Work due |
|---|---|
| 60,000 km | Engine oil and filter; pre and main fuel filters; AdBlue dosing filter; full scheduled inspection. |
| 120,000 km | 60,000 km items plus fuel feed-pump filter, transmission oil, differential oil, steering oil and filter, coolant, and front/rear hub greasing. |
| 180,000 km | Repeat the 60,000 km service. The guide also marks the third free-service coupon at this milestone for the LMD E474 OBDII schedule. |
| 240,000 km | Repeat the 120,000 km drivetrain, steering, coolant and hub service; service air-valve kits and the APDA/APU desiccant cartridge. |
| 300,000 km | Repeat the 60,000 km service; change clutch hydraulic fluid and service the APDA/APU major kit. |
| 360,000 km | Repeat the 120,000 km drivetrain, steering, coolant and hub service cycle. |
| 420,000 km | Repeat the 60,000 km service cycle. |
| Condition-based | Clean the DEF neck filter if choked and the DPF when required. Inspect any critical warning or abnormal brake or steering condition immediately. |
Follow the actual cluster message; alert descriptions are general guidance.
Action: Stop safely, shut down as directed by the cluster, and check oil, coolant and leaks. Diagnose before restarting.
Action: Do not move until normal operating pressure is restored and the warning clears. Inspect the brake-air system.
Action: Check DEF level and follow the instrument-cluster instructions; arrange service if the warning persists.
Action: Follow the vehicle's indicated regeneration procedure or seek authorized service; do not assume a fixed trip limit.
Action: Check belt condition, battery terminals and alternator; arrange diagnosis before an extended trip.
Action: Hold the truck at pre-start and rectify the fault before dispatch.
Verify the approved grade and actual fill level for this configuration before servicing.
Engine oil
10 L service quantity · 60,000 km
Coolant
10 L service quantity · 120,000 km
ET40S6 transmission oil
4.75 L, without PTO · 120,000 km
Differential gear oil
8 L · 120,000 km
Steering oil and filter
3 L oil · 120,000 km
Clutch hydraulic fluid
0.5 L · 300,000 km
Front hub grease
900 g · 120,000 km
Rear hub grease
1,500 g · 120,000 km
AdBlue / DEF
27 L tank; top up as needed · Check daily
DEF dosing-pump filter
Replace element · 60,000 km
DEF secondary neck filter
Inspect; replace if choked · Condition-based
Key facts about the Eicher Pro 2110 6S truck